New

New

S.A.Lab Black Knight Power amplifier blends together the best sound qualities of tube and solid state amplifiers. State-of-the-art class component reconciles tube and solid state aficionados and captivates the most sophisticated audiophiles.

Concerning schematic design Black Knight Power is similar to Black Knight Integrated. Due to combining single end Class A driver with solid state JFET repeater Black Knight Power's sound blends together pleasant single end tube amplifier spectrum and solid state speed and dynamics.

Increased quiescent current (up to 3 A) resulted in raising Class A part of total output power to 90/45 W (8/4 Ohm).
Black Knight Power's regulated dual mono power supply has more powerful S.A.Lab designed and produced transformers (2 х 650 W) along with capacitors of 200 000 mF in total.

We also increased output stage feeding as well as added low noise coolers to heat sinks and amplifying stages.

Channel separation is raised to 135 dB.
There are balanced and unbalanced inputs (RCA, XLR), 4 pairs of acoustic binding posts, trigger signal sockets and operating time counter. Bridge mode gives one channel with more power.

Output power (4/8 Ohm), W — 350/175
Class A (8/4 Ohm), W — up to 90/45
THD (100 W, 4 Ohm), % — 0,01
Intermodulation (100 W, 4 Ohm), % — 0,008
Signal-to-noise ratio (unweighted), dB — 112
Channel separation, dB — 135
Power consumption (Standby mode), W — <200
Dimensions, mm — 480 х 280 х 500
Weight, kg — 56

•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•
•

•
•
•
•
•

•
•

•
•